SEATING & TRANSPORT - CAR SEATS & CAR RESTRAINTS - page 8

Seating & Transport - car seatS & car restraints
SA-8
FAS SWIVEL BASE FOR Columbia Car Seat
Model No. :
SCS2600
(for Car Seat
SCS2000
only)
The FAS Swivel Base for Columbia Car Seat allows the car seat to turn
and face the car door, making it much easier to load and unload your
child. Once the child is loaded or unloaded, the car seat can be swivelled
back to a front-facing position.
If you have an existing car seat, the FAS Swivel Base can be retro-fitted
to suit your car seat. A detailed set of instructions are provided for
installation and operation of the FAS Swivel Base.
FAS Swivel Base with the Columbia Car Seat.
With a swivel car seat the carer doesn't need to do risky
bending or twisting to help the user out of the seat.
1) Loosen the vehicle seat belt by pulling gently for as long as possible so as
to allow the Columbia Car Seat to move and swivel. For cars fitted with belt
pre-tensioner you may have to pull the belt out very gently to avoid activating
the pre-tension system.
how to swivel the base
2) Use the enclosed clip to stop the seat belt from retracting and to keep the
seat belt loose in order to allow the car seat to slide forward and to swivel.
3) Loosen the tether strap by pushing on the release button and pulling the belt
loose as much as possible. This is also necessary to allow the Car Seat to move.
4) Pull out the locking pin. At the same
time, use your left hand to pull the seat
forward slightly. Release the locking pin.
Continue to pull the seat forward fully.
5) Continue to rotate the car seat until the swivel stops. The
Columbia car seat is now facing the open door from where
you can safely put your child in the car seat.
New
design
1,2,3,4,5,6,7 9,10,11,12,13
Powered by FlippingBook